1010mm × 2500mm Cross Flow Fill for Cooling Tower Applications

The Cross Flow Cooling Tower Fill is designed for cross-flow cooling towers where accurate fill dimensions and stable air-water contact are required. It can be used for both new cooling tower assembly and existing fill replacement.

Designed for a 1010mm × 2500mm Fill Layout

This cooling tower fill has a standard 1010mm width and 2500mm length, with customizable thickness for different installation conditions and tower configurations.

Technical Specifications

• Width: 1010mm
• Length: 2500mm
• Thickness: Customizable
• Pitch: 18mm
• Angle: 5.5°
• Material: PVC, CPVC, PP

18mm Pitch and 5.5° Corrugated Structure

The corrugated surface creates defined channels for circulating water and airflow. The 18mm pitch and 5.5° angle are designed to maintain effective contact between air and water while supporting consistent flow through the fill.

Material Selection Based on Operating Conditions

The fill is available in PVC, CPVC, and PP. Material selection can be matched to the cooling water temperature, chemical environment, and operating requirements of the tower.

Suitable for Fill Replacement and Tower Renovation

Accurate dimensions are important when replacing existing cooling tower fill. This product can be supplied with customizable thickness to better match the available installation space and existing tower structure.

Related Cooling Tower Products

Crossflow Film Fill |Counterflow Film Fill |Splash Grid Fill |Drift Eliminators

Provide your existing fill dimensions or cooling tower drawings, and we can help confirm the suitable Cross Flow Cooling Tower Fill configuration.